JMB SRT-10 RAM Procharger F1X / F2 DIY Kit

$9,138.00$9,725.00

The first and only Do it Yourself 1000+ WHP kit on the market for the SRT-10 Ram. Available in pieces for those that want to spec out their own parts or buy the entire kit and be ready to go. Requires keyed crankshaft with upgraded Balancer. Will not clear stock fan assembly. Not for stock motors!!

Kit Includes:
-ATI Procharger F1-X or F2 Supercharger
-Billet 6061T6 Bracket System
-Dedicated drive system with crank, blower, and idler pulleys, crank adapter, and belt.
-All Stainless Hardware
-Powdercoated finish on all brackets and spacers
-Huge 4.5″ thick Garrett GT Core intercooler rated to 1000 HP
-All Intercooler piping from Supercharger and to throttle body with powdercoat
-Tial BOV
-T-bolt clamps
-Silicone couplers
-Air Intake Assembly with custom powdercoated heat shield
-High flow air filter
-Must send in your A/C condenser for modifications.
-Installation instructions included
-Pulley sizes tailored to each combination

Required for install:
-Coolant Overflow Jug
-ATI Super Damper BalancerSupercharger/Drive recommendation:

F2 50 mm Cog: Built engine, broader power curve, 18-25+ PSI. Race or light street applications only.
F1-X 12 Rib: Built engine, high rpm/peak power, 15-18 PSI.
F1-X 50 mm Cog: Built engine, high rpm/peak power, 18-22+ PSI. Race or light street applications only.

Free powdercoat of you choice is included with this product. Just visit our Color Chart for a complete color selection and add the color(s) you would like in the comments section at the bottom of the page.

Electric Radiator Fan Assembly
-Required for 12 Rib and Cog Drive clearance -Huge Electric Fan -Custom powdercoated shroud -Thermostat/relay assembly with SRT10 specific wiring harness -SS braided power steering replacement line -All hardware and installation instructions -Specify powdercoat in the comments section.
Polished Supercharger and Intercooler Tanks
Upgraded 1500HP Intercooler
Huge 24″x24″ core, rated to 1500HP. Modifications required to front bumper assembly.
Automatic Transmission Cooler Modifications
Modifies the OEM transmission cooler on quad cab models for intercooler clearance. Must send in your OEM transmission cooler for modifications.
Crank Pin Kit
Dual Pump Fuel System(Required)
Dual Pump Fuel System good to approximately 900-1000 whp, includes upgraded fuel pumps, upgraded feed and return lines, a pressure regulator, fuel filter, fuel pressure gauge, powdercoated billet fuel rails and 725cc injectors. Completely new fuel system, nothing reused except for the gas tank.
Tuning Systems
SCT X3 Hand held programmer with custom tune. Includes revisions to dial in your specific combination. Programmer has data logging capability.
If you have any comments or questions about your order just use the box below to let us know.
Items Required for Install.
Product Name
  • $0.00
  • $0.00
  • Total $0.00

SKU: JMB SRT-10 RAM PROCHARGER F1-X / F2 DIY KIT Categories: , ,

SHARE

Additional information

Weight 149 lbs
Dimensions 24 × 24 × 24 in
RAM Procharger F2 DIY Kit

F2 50mm COG, F1-X 12 RIB, F1-X 50 mm COG

Recent Reviews

Product Categories

Product Categories

Recent Reviews